Pickup truck warming up with remote start in a snowy West Michigan driveway

All posts

Remote Start 101: Warm Up Your Jeep, Ram, Dodge or Chrysler from the Couch

Published on Nov 16, 2026 by Mark DeGroot

Quick answer: On most Chrysler, Dodge, Jeep and Ram vehicles, press the Remote Start button on your key fob twice within five seconds. The doors lock, the parking lights flash and the engine runs for 15 minutes. You can also start from your brand's app. Remote start won't work if a door or the hood is open, fuel is low or the check engine light is on.

Every West Michigan neighborhood has one: the guy who shuffles out in a bathrobe at 6:45 a.m. to start his truck and scrape the windshield in the dark. Respect the commitment. But if your Jeep, Ram, Dodge or Chrysler has remote start, you can skip the bathrobe walk entirely and step into a warm cab with a clear windshield. Here's how it works, why it sometimes doesn't, and how to fix it.

Pickup truck warming up with remote start in a snowy Grand Rapids-area driveway at dusk

How do I remote start with my key fob?

On most models, it takes three steps:

  • Press and release the Remote Start button (the circular-arrow button) twice within five seconds.
  • The doors lock, the parking lights flash and the horn may chirp, then the engine starts.
  • To shut it off early, press the Remote Start button once more.

When you're ready to drive, unlock the doors, climb in with the fob and start the vehicle the way you normally would. Fob layouts vary a bit by model and year, so check your owner's manual if your buttons look different.

Can I remote start my Jeep or Ram from my phone?

Yes. On connected vehicles, the Jeep, Ram, Dodge and Chrysler apps let you start the engine, lock and unlock the doors and more from your phone. That's handy when you're inside Van Andel Arena for a Griffins game and want the truck toasty before the parking-lot walk.

Good news for new-vehicle buyers: for most 2027 models, app remote start is included for 10 years after you enroll in the brand's connected services. For older model years, features and plans vary, so check your app. Learn more on our Uconnect page.

How long does remote start run?

A remote start runs for a 15-minute cycle. You can remote start twice back to back, for up to 30 minutes of warm-up. After that, the system wants you to start the vehicle normally before it'll remote start again. On equipped vehicles, the climate system and heated seats can kick on automatically when it's cold, so the cab is ready when you are.

Why won't my remote start work?

Remote start is picky on purpose. It won't start (or will cancel) if:

  • The vehicle isn't in Park
  • A door or the hood is open
  • The hazard lights are on or the brake pedal is pressed
  • The battery is low or the fuel is low
  • The check engine light is on
  • The security alarm is active or the panic button was pressed
  • The system was disabled by a previous remote start

If the engine starts and then shuts off within about 10 seconds, low fuel or an engine fault is usually the culprit. And if the fob just isn't reaching, the fob battery may be fading. Our Mopar Express Lane team can help with that without an appointment.

What does "Remote Start Disabled, Start Vehicle to Reset" mean?

This message shows up after you've used your remote start cycles, or after a remote start was canceled. It's not a malfunction. The fix is easy: get in, start the vehicle normally with the fob, and the system resets for next time. Other messages you might see include "Remote Start Canceled, Door Open," "Hood Open," "Fuel Low" and "Time Expired," which all mean exactly what they say.

Can I add remote start to my vehicle?

Many Chrysler, Dodge, Jeep and Ram vehicles can add factory-designed remote start through Mopar, depending on the model and equipment. Ask our parts team what fits your vehicle. If you're shopping for a new ride, remote start is one of the best features to put on your must-have list, especially with our Black Friday specials running now.

Is it bad to warm up your car in winter?

Modern engines don't need a long warm-up to protect them. Remote start is mostly about comfort and clear glass. A few minutes is plenty for defrosting, then drive gently for the first few miles while everything comes up to temperature. Your engine (and your fingers) will thank you on the way to Woodland Mall on Black Friday morning.

One safety rule we never skip

Never use remote start in a closed garage or enclosed space. Exhaust contains carbon monoxide, which you can't see or smell. Open the garage door all the way or pull outside before you start the engine.

Want a quick walkthrough of remote start or the app on your vehicle? Stop by Courtesy Chrysler Dodge Jeep Ram and any of our sales or service team members will show you, no appointment needed.

Remote start FAQ

Does remote start on a Jeep or Ram need a subscription?

Key fob remote start doesn't need a subscription. Starting from your phone uses your brand's app and connected services. For most 2027 Chrysler, Dodge, Jeep and Ram models, app remote start is included for 10 years after enrollment. Older model years vary, so check your app or ask us.

How long does remote start run?

On most Chrysler, Dodge, Jeep and Ram vehicles, a remote start runs for a 15-minute cycle. You can remote start twice in a row; after that, start the vehicle normally once to reset the system.

Why does my remote start shut off after a few seconds?

If there's an engine fault, the check engine light is on, or fuel is low, the engine will start and then shut down within about 10 seconds. Have the warning light checked or add fuel and try again.

Can I use remote start in my garage?

No. Never remote start in a closed garage or any enclosed space. Exhaust contains carbon monoxide, which is odorless and can cause serious injury or death. Open the garage door or pull outside first.

— Mark DeGroot, Marketing Manager, Courtesy Chrysler Dodge Jeep Ram